Low Shipping $9.95
Combine Shipping and Save!
The SkyRC B6AC QUATTRO is a high-performance, micro processor control charge/discharge station with battery management suitable for use with all current battery types. With integral equalizer for six-cell Lithium-Ion (LiIon), Lithium-Polymer (LiPo) and Lithium-Ferrum (LiFe) batteries.
It has a maximum 6A charge current and can be powered by a 12 Volt car battery or from the 110V AC(US Version) or 220V AC via the built in switch-mode power supply.
The circuit features four totally independent identical power outputs which are 50 watts each, totaling 200 watts. As a result , it can charge or discharge up to 4 Ã— 15 cells NiCd/NiMH or 4 Ã— 6 series Lithium batteries simultaneously. The B6AC Quattro has four individual cell voltage balancers at each output, so it does not require a separate balancer when charging Lithium Batteries (LiPo/LiIon/LiFe).
When a Nickel battery is fully charged, the unit terminates the process using the Delta-Peak method. Lithium and lead (Pb) batteries are charged using the CC-CV method.
The fan cooling system is smart and efficient, controlled by internal temperature sensor.
Allows you to plug 4 batteries into one charger simultaneously, and intelligently and automatically charge all 4 of them at once to their maximum capacity. To top it of, the batteries being charged do not even need to have the same configuration. You can connect different chemistry（Ni-MH/Ni-CD/LiPo/LiFe）batteries into any of the charging ports. No more staying up late for charging batteries.
Optimized operating software - has auto function that sets the feeding current during the process of charging or discharging. It can prevent the overcharging which may lead to an explosion. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product are controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer - employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging.
During the process of discharging, the Quattro B6AC can monitor and balance each cell of the battery individually. An error message will be indicated and the process will be ended automatically if the voltage of any single cell is abnormal.
Is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Fast and Store charge modes of lithium batteries - 'fast' charge reduces the duration of charging, whereas 'store' can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Maximum safety - Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit - You can set up the upper limit of the charging current when charging your NiCd or NiMH battery, it is useful for the NiMH battery of low impedance and capacity in the 'Auto' charging mode.
Capacity limit - The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
Temperature threshold* - The battery's internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated.
* This function is available by connecting optional temperature probe, which is not included in the package.
Processing time limit - You can also limit the maximum process time to avoid any possible defect.
Data store/load - The maximum five batteries' data can be stored for each output(4Ã—5set). You can keep the data pertaining to the program setting of the battery of continuous charging or discharging. Users can call out this data at any time without any special program setting.
Cyclic charging/discharging - 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and balancing to stimulate the battery's activity.