The SkyRC e6 Charger is an economical, high quality 100-240V AC balance charger, designed for charging LiPo and LiFe batteries from 2-6 cells in balance mode. The circuit power is 50W and max charge current
is 5A. Four charge currents 1A/2A/4A/5A may be selected according to your battery capacity.
There is one LED indicating the charge status (ready to charge/charge in CC mode/charge in CV mode/charge finish) and six LEDs indicating each battery cell status (charge/discharge).
This allows you to know the charge status at any time via these LEDs indicators.
Operation of this charger is very simple. There are two toggle switches on the
charger which can be used to select the correct battery type and charge current.
Power up the charger, select the battery type and charge current, connect the
battery and charger via the balance plug from your battery and the charger will
Low cost.In-built power supply: simply connect the AC power cord to the mains AC socket directly.AC Input 100-240V: use this charger
anywhere in the world with no concern of damage caused by an incorrect input voltage.
Charge batteries in balance mode: the voltage of each cell will be balanced so that the battery will
perform correctly and improve cycle life.
Comes with XT60 Connector.
Input Voltage: 100-240V,50-60HZ
Output Power: 50W
Charging Current: 1A,2A,4A,5A (selectable)
Battery Type: LiPo/LiFe
Battery Cell Count: 2-6S
Current Drain for Balancing: 200mA
Dimensions: 82.7mm x 140.5mm x 45.7mm
Australian Mains Power lead (you may use an adapter or source a cable locally).