Hobby Warehouse is Australia's Largest for Remote Control Cars, RC Hobbies, RC Helicopters and Planes BEST PRICE GUARANTEED.
2018 Stock Take Sale - NOW ON!
King Motor Baja KM-REV-2-SPEED Black 30.5cc 1/5 Scale 2WD RC Buggy
King Motor Baja KM-REV-2-SPEED Black 30.5cc 1/5 Scale 2WD RC Buggy
Don't Pay: $1,249
You Save: 24% ($294)
Buy now, Pay later with More info
In Stock at Hobby Warehouse
Order Now and it Ships Today or Monday 23rd July
Low Shipping $35.00
Combine Shipping and Save!
Secure SSL Encrypted SAFE Payment Gateway Visa, MasterCard, PayPalAmerican Express, JCBDirect Deposit
  • Description

The King Motor REV 2 SPEED is powered with the all new design 4 bolt 30.5cc 2-stroke, air cooled petrol engine and comes complete with a two speed King Motor Heavy Duty 2 transmission. This buggy has true wheel standing performance and is now supplied with a wheelie bar so you can snap the throttle open and let this monster rip. This vehicle is fully compatible with HPI 5B, HPI SS, and HPI 2.0 baja buggy models. Most HPI stock parts and aftermarket parts are interchangeable with King Motor buggies.

The King Motor Baja KM REV 2 SPEED 1/5 Scale Gas / Petrol Powered RC Remote Control buggy is rugged enough to take just about anything you can throw at it along with providing outstanding value for money. This 1:5 scale, ready-to-run off-roader is manufactured with extreme attention-to-detail by King Motor Sport.

High Performance 30.5cc Petrol Engine

At an amazing 817mm in length, this fully assembled Baja Buggy comes equipped with a Petrol 2-stroke, 30.5cc 4 Bolt engine, adjustable Walbro carburetor and high performance 8000rpm clutch. This motor is also fitted with a King Motor Thor Power Pipe which is capable of propelling this missile to speeds of up to 90 kph.

New Design 2 Speed transmission

The Rev 2 Speed is fitted with an all new design gear box and includes an optional 3rd taller gear ratio for the user to fit for maximum top end speed. This transmission is fitted as standard with hardened steel gears and the following ratios: 17/57 first gear - for better off the line performance and 20/54 second gear - for awesome top end speed. The optional 22/52 second gear ratio (supplied in the box) will give the REV 2 maximum speed with the trade off being less acceleration in 2nd gear.

2.4GHz Digital Radio Transmitter System

This off-roader features an all new MT-3D 2.4-GHz radio system specifically designed for gasoline powered vehicles giving better control and range. This new radio system is a 3 channel full range 2.4GHz FHSS Digital Proportional Computer Radio and its features include: 4-AA Battery holder for light weight and improved balance, Easy to read LCD screen, 10 model memory, Servo reversing on all channels, Dual rate steering, End point adjustment on all channels, Exponential steering and throttle, Anti-lock braking, Digital trim display, Servo sub-trim for steering and throttle, 3 character model naming, Low battery memory retention, Built in Fail-safe, Low voltage alarm.

Super Heavy Duty Servos

The all new KM REV 2 SPEED is fitted with a high-torque KM-3318 35 kg/cm steering servo and KM-2013 20 kg/cm throttle servo for improved steering and superior throttle brake control.

Upgraded Components

This huge 12Kg buggy is loaded with fully-adjustable VVC shocks, all new heavy duty billet aluminium shock supports and braces, billet aluminium differential case along with the all new billet aluminium flame design chassis. All these design features make this model one rugged machine.

Heavy Duty Poison Rims & Pioneer Tires

Fitted with all new design black poison rims and Pioneer Buggy size tires with medium foam compound allows the KM REV 2 SPEED to work great on grass, dirt and most off road surfaces.

Electronic stability Control

Adding to King Motors desire to be leaders in innovation the KM REV 2 SPEED is now supplied as standard with an all new Electronic Stability Control system which is enabled by a gyroscopicaly controlled module that the user can set the sensitivity of its control input.

This system takes control of your vehicle in a slide situation. Should the vehicle approach a problem where the rear end reaches a point where the slide will become an out of control spin the "stability control system" will activate and prevent this out of control event.

The module is not fitted to the buggy but is supplied in the box for the user to add at their discretion. Please note as as good as this system is, it is not 100% foolproof and will not compensate for all out of control situations and some common sense will have to be applied.

Ready To Run

This vehicle comes with a 4-piece body kit that can be replaced if desired, rechargeable onboard 6V 4800mAh Ni-Mh battery and Australian mains power charger . All that is required to get you on the race track fast is 2-Stroke oil, 91 Octane unleaded Petrol and 4 x AA batteries for the transmitter.


  • 4 bolt 30.5CC engine,2-stroke, aircooled
  • Thor Pipe
  • Walbro Carburetor #997
  • CMR7H Spark Plug
  • High performance 800RPM Clutch
  • 6061 New Fire Design chassis-chrome
  • 66086-2 with chassis protecting plate
  • New suspension arm using PA66 material
  • Large-bore shocks with shafts & threaded adjusters
  • New extend axle design
  • Wheelie bar
  • 6061-T6 6MM HD Billet alum front upper plate 66026
  • 6061-T6 6MM HD Billet alum rear upper plate 66027,66028
  • 6061-T6 Front shock support set J026-27,
  • Front shock tower J029
  • Front shock brace J030
  • Rear shock brace J031
  • New 2 speed Gear Box, 3 gear ratios (17T/57T, 20T/54T, 22T/52T).
  • Drive Shaft: 6MM steel drive shaft
  • Wheel & Tyre Set:Pioneer tire with Poison Rim complete 170 x 60mm (front) and 170 x 80mm (rear)
  • Onboard Battery: 6V 3000mAh Nicked Metal Hydride with short circuit protection
  • Throttle servo: KM-2013 20KG throttle servo(from Taiwan)
  • Steering servo: KM-3318 35KG steering servo
  • Radio: MTD 3-channel 2.4GHz digital proportional radio control high response system.
  • EST Gyroscope System:High Stability RC vehicle gyroscope system to aid vehicle control.
  • Australian Mains Charger
  • English Manual


  • Vehicle Size: Length 817mm x Width 480mm x 255mm
  • Net weight: 12Kg
  • Package Size:Length 870mm x Width 510mm x Height 320mm
  • Gross Weight:21kg
  • Volume Weight:28.4Kg

    Bonus Material

  • CNC machined tool kit with bag
  • Spark-plug tool
  • Tire tool
  • Multi-function wrench
  • Fuel Mixing Bottle with mix ratios

    **Please do not use Ethanol E10 Petrol with this vehicle as it will result in poor running, difficult starting along with damage to carburetor and fuel lines.**
  •  Do you have feedback, general suggestions or a product recommendation? Click here to let us know!
    Thank you! Your feedback is appreciated.