What is your hobby?
How do YOU express your creativity?Browse for Inspiration 
Browse for inspiration

iCharger 1010B+ 10A Synchronous Balance Charger / Discharger

or 4 payments of $43.50 with Info
own it from $10/wk
  • In Stock
  • Order Now and it Ships within 1-3 business days
  • Low Shipping $9.95
  • Combine Shipping and Save!
  • Want it delivered Tomorrow Tuesday 17th December between 6pm and 9pm?
  • Check your postcode: 


iCharger 1010B+ is a 10 cell lipo charger. Capable of balance charging any lithium battery between 1-10 cells and 1-25 cell NiMh/NiCd batteries. Utilising the iCharger 1010B+ cell capacity the user can charge more than one same capacity battery pack in series, for example, charge 1 x 3000mah 2cell and 1 x 3000mah 3 cell lipo at the same time. With its 300 watt of rated power iCharger 1010B+ will offer faster charging time than any other similar charger on the market.


High power, high current, high-performance power conversion circuit. The iCharger series uses advanced Synchronous buck-boost DC/DC converter technology with an output conversion efficiency that can reach over 90%. This not only saves power and reduces heat build up but also makes the charger more compact and conveniently mobile.

Two input power choices: DC jack with auto-resetting fuse (maximum input current 7A) and butt-welded alligator clips with 4mm bullet connectors (25A).The output power can be adjusted to align with the available input power, thus preventing input current overload and protecting the DC source.

The iCharger series can be used with three types of Lithium batteries - LiPo, Lilo, LiFe - and has a fully integrated cell balancer.

The internal temperature sensor automatically controls a cooling fan for internal temperature regulation and provides intelligent protection against overheating. When the internal temperature is exceeds 60℃(140 oF), the output power is automatically reduced by 25%. If the temperature exceeds 65℃(149 oF) the charge cycle is stopped.

Convenient set of 10 battery profile memories that can be saved and loaded by number.

A 2 x 16 backlit LCD screen that provides clear information including active mode, current, voltage, total charge (mAh), charging time and temperature etc.

Various charging/discharging settings and cycles are provided to meet a wide range of customer requirements. For Lithium batteries: balance charging, normal charging, fast charging, storage, discharging, ext-discharging, charge/discharge cycling, and battery monitoring. For NiCd/NiMH batteries: charging-auto, charging-manual, discharging, charge/discharge cycling and forming charge. For Pb batteries: charging and discharging.

Unique Lithium battery expanding discharge program. When you connect the external capacity resistance, you can use it as the maximum discharge power capacity—280W (@40V/7A).

A unique Lithium battery Monitor program. When you use other equipment to charge or discharge a Lithium pack, you can use the iCharger to monitor the per-cell voltages, battery temperature and process time. If any individual cell appears over-charged or over-discharged or the pack is too hot or the process has gone on for too long, the iCharger will sound an alarm and the related information will blink.

Electric motor test mode can be used to run-in electric motors, test motor parameters and performance along with checking tolerances etc.

Foam-cut drive. In this mode, the charger acts as a convenient power supply for a hot wire foam cutter.

Battery interior resistance measurement. The iCharger can not only measure the internal resistance of the battery pack, and also can measure the per-cell internal resistance (only available for lithium batteries).

Perfect protection. The iCharger has protection for reversed polarity (input or output), low input voltage, battery temperature, charging capacity and time overrun.

The 1010B+'s hardware program can be updated via the USB port. The iCharger also supports “Logview” software and can display, plot and analyze charge and discharge data. (For more information about "Logview" following website: http://www.logview.info)


  • Input Voltage: 10-18 Volts
  • DC Charge Current Range: 0.05 – 10.0
  • Amps Discharge Current Range: 0.05 – 7.0 Amps
  • Maximum Charge Power Capacity: 300 watt at input voltage greater than 13.5 volt
  • Maximum Discharge Power Capacity: 30 watt
  • Current Drain for Balancing: <300ma
  • Balance Accuracy: <10mv
  • Lithium (LiPo/Lilo/Life) Battery Cell Count: 1-10 series
  • NiMh/NiCd Battery Cell Count: 1-25 Series
  • Pb (Lead Acid) Cell Count: 1-18 series (2-36v)
  • Battery Setup Memories: 10
  • Intelligent Temperature Control: Yes
  • PC Connect: USB Port
  • Weight: 410g
  • Dimensions (LxWxD): 143 x 97 x 26mm

    Please Note: The iCharger 1010B+ standard package does not include a balance board

  • Manufacturer:
    Product Code:
    $150 to $200

    What people are saying about Hobby Warehouse

    Item added to cart
    iCharger 1010B+ 10A Synchronous Balance Charger / Discharger

    VIP Club is a FREE and fun program designed to reward our most loyal customers for the purchases they make at Toys R Us and Babies R Us, online at www.toysrus.com.au.

    Simply subscribe to our newsletter below to register, and sign in online whenever you shop. It's that easy!

    Become a VIP!

    *  indicates required
    own it now, pay later
    Want it
    Choose the items
    you love and select
    Zip and checkout
    Get it
    We pay the store,
    you get the goods,
    nothing to pay today
    Own it
    Choose how you pay
    us back over time,
    interest free

    Installments by

    Shop now
    Play now
    Pay later
    4 interest-free payments every two weeks at checkout

    At checkout, select Afterpay as your payment method
    Use your existing payment card
    Simply complete your checkout
    No long forms, instant approval decision
    Pay in 4 installments
    Pay every 2 weeks, enjoy your purchase right away